Configure Entrust Gateway

This tutorial provides instructions on configuring the Entrust Gateway. This setup ensures that certificates issued by the Unifyia platform during identity issuance originate from Entrust Gateway.

Prerequisites

  • Entrust CA is already installed and all the required certificate profiles are configured.
  • You will require the following values:
    • CA Name
    • Gateway Root URL
    • SSL Client Certificate
    • Client Certificate Password
    • SSL Server Certificate

Configuration Steps

  1. Log in to the Unifyia platform.
  2. On the Dashboard page, navigate to Integrations > Certificate Authority. The Certificate Authority page appears.
  3. Select + Add Certificate Authority.
  4. Enter the following information:
    1. Provider: Select Entrust CA from the drop-down list.
    2. CA Name: Enter a name for the CA.
    3. Name: Enter the display name or a common name for this CA.
    4. Description: Enter a brief description of this CA integration.
    5. Gateway Root URL: Please input the gateway root URL. This is the web address or URL where the Entrust CA Gateway service is hosted.
    6. Authentication Type: Select Client Authentication from the drop-down list. This refers to the mode of authenticating to the EJBCA UI.
    7. SSL Client Certificate: Upload the SSL client certificate from the saved location on your system. This is a certificate used to verify the identity of clients accessing the CA.
    8. Client Certificate Password: Enter the password for the client certificate.
    9. SSL Server Certificate: Upload the SSL certificate from the saved location on your system. This is a digital certificate issued by a CA to establish a secure connection with the server.
  5. To check if the configuration is successful, select Test Configuration.
  6. After a successful test, select Save.

Back Next
On this page
Related Links
How-To-Guides